Heavy Industry Steel Structure Workshop Prefabricated Industrial Steel Buildings
Project Information:
Heavy Industry Steel Structure Workshop Prefabricated Industrial Steel Buildings:
Why does the workshop need to choose the steel structure workshop? This is because the steel structure workshop is higher than the traditional building structure workshop both in terms of safety and service life. All materials in the steel structure workshop are made of semi-finished steel products. The section area of components is small, which is easy to install and transport, reduces the amount of construction on site, facilitates installation and will not have a great impact on the surrounding environment. It is a green and environmentally friendly building.
Workshop selection of steel structure workshop is because of its large internal space, can improve the production workshop space demand, steel structure workshop construction is undoubtedly very favored by enterprises, not only convenient construction can save cost, so that the construction of steel structure workshop as a production workshop is more and more extensive.
Specification of steel structure material:
| Item name | Specification | Material Parameter | Technical Treatment |
| Column | H shape steel | Q235B,Q345B | Paint or Hot dip galvanized |
| Beam | H shape,steel Truss | Q235B,Q345B | Paint or Hot dip galvanized |
| Bracing | Steel rod,Steel pipe,Angle steel | Q235B,Q345B | |
| Purling | C or Z shape, purling Thickness:1.8mm~3.0mm | Q235B,Q346B | Hot dip galvanized |
| Wall and roof panel | Glass wool Sandwich panel | Steel T=0.426~0.8mm,insulation T=50~150mm | Alu-zinc 150g, Fluorocarbon paint |
| Door | Sliding or rolling door | Steel or Aluminum sheet,T=1.0~1.5mm | Paint or Hot dip galvanized |
| Window | alloy-Glass,Aluminium alloy-shutter | T=1.0~2.0mm | Alloy |
| Lighting panel | FRP, T=1.5mm or T=1.8mm | Coefficient of thermal expansion:2.2x10-5/cm/cm/℃ | Light transmittance 85% |
| Ventilator | Turbine ventilator, and electric type | Steel,stainless steel,PC | Paint or Hot dip galvanized,304 |
| Gutter | Galvanized or stainless steel plate | T=2.0mm | Hot dip galvanized,304 |
| Downpipe | PVC pipe,Color steel pipe T=0.5mm | Φ110,160,200 | Paint |
| Bolt | Ordinary, high strength | 10.9S,4.8s | Hot dip galvanized |
| Anchor bolt | Steel rod M24,M27 M30 | Q235B | |
How to install:
We will provide construction drawing for each project to guide installation. We will teach you the installation in our factory. We could dispatch our engineer to guide installation on site or we install it by our construction team.
Our service:
1. Structural steel fabrication, painting , galvanizing , pre-assembly
2. Designing, fabrication and installation for Prefabricated steel structure building.
3. Deepen or design the fabrication drawing or shop drawing based on your architectural drawing and construction drawing
4. Engineering consulting service
How to quote:
The following question we need to know before making the price. Just feel free to fill what you know.
| 1 | Location (where will be built?) | _____country, area |
| 2 | Size: length*width*height | _____mm*_____mm*_____mm |
| 3 | wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
| 4 | snow load (max. snow height) | _____kn/m2, _____mm |
| 5 | anti-earthquake | _____level |
| 6 | brickwall needed or not | If yes, 1.2m high or 1.5m high |
| 7 | thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be suggested; . if not, the metal steel sheets will be ok. The cost of the latter will be much
lower than that of the former |
| 8 | door quantity & size | _____units, _____(width)mm*_____(height)mm |
| 9 | window quanity & size | _____units, _____(width)mm*_____(height)mm |
| 10 | crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting height _____m |
Product Tags:
|
|
Heavy Industry Steel Structure Workshop Prefabricated Industrial Steel Buildings Images
|
